Jacks and Jack Stands

At TechnoKing you can choose hydraulic jacks rated for various loads and Jack Stand type jack stands, both for personal use and for auto services and workshops. When choosing a jack and a jack stand, the vehicle’s weight, the required lifting height, the device’s maximum load, the vehicle type and the nature of the work all matter. A jack and a stand are not interchangeable tools. The jack’s main purpose is to lift the vehicle, while the jack stand is used to hold the raised car steady in place.

What is a car jack?

A car jack is a lifting device that makes it possible to raise a certain part of the vehicle off the ground. A jack is used especially often when changing a tire, inspecting the undercarriage and carrying out various tasks related to the underside of the vehicle. There are several types of jack, though one of the most common options in auto services and workshops is the hydraulic jack. Using a hydraulic system allows a relatively heavy vehicle to be lifted in a controlled way. When choosing a specific jack, you should always verify the maximum permissible load and the lifting height range.

What is a hydraulic jack?

A hydraulic jack uses a hydraulic mechanism to lift the vehicle. As the user moves the handle, pressure is created in the system and the lifting part gradually raises the vehicle. Such a design is especially practical when performing various technical tasks at an auto service, in a garage and at home. The main parameters of a hydraulic jack are the maximum load, the minimum height and the maximum lifting height. It is important to assess all three indicators together. A high load capacity does not by itself mean that a specific jack is suitable for any vehicle.

The jack’s load capacity

One of the first parameters in a jack’s description is the maximum load. For example, at TechnoKing there are 2.5-ton and 3-ton hydraulic jacks. This indicator is related to the device’s maximum working load. When choosing a jack, you need to take into account the vehicle’s weight and the manufacturer’s requirements. Do not use the device with a load higher than the maximum capacity specified for it. When choosing a jack for an auto service, additionally consider what type and size of vehicles you most often work with.

2.5-ton hydraulic jack

The 2.5-ton jack is a practical choice for working with various passenger cars, when the specific car’s weight and jacking points match the device’s capabilities. At TechnoKing there is the SELPRO 2.5 T hydraulic jack. This model’s minimum height is 140 mm, while its maximum lifting height is 387 mm. The minimum height is especially important in the case of a vehicle with low ground clearance. If the jack’s starting height cannot fit under the vehicle’s jacking point, a high load capacity loses its practical value. Therefore, before buying, always compare the vehicle’s ground clearance and the jack’s minimum height.

3-ton hydraulic jack

The 3-ton jack is often used both in private garages and in professional auto services. One of the 3-ton hydraulic jack models available at TechnoKing has a minimum height of 10 cm, while its maximum lifting height is 49 cm. A relatively low starting position is practical with vehicles where there is little space to slide the jack in. The maximum lifting height also matters, because depending on the type of work it may be necessary to raise the vehicle to different levels. Before using it on a specific car, always verify the jacking points specified by the manufacturer.

Low car jack

Not every jack is convenient to use with a vehicle that has low ground clearance. In such a case you should pay special attention to the device’s minimum height. The lower the position at which the jack can start working, the more easily it can be placed at the vehicle’s corresponding jacking point. For sports cars, low sedans or vehicles with a modified suspension, this parameter is often one of the main criteria. Therefore, when choosing a jack for a low car, you should not consider tonnage alone.

What is a Jack Stand?

A jack stand is a car stand used to secure a vehicle that has already been raised. The jack raises the vehicle to the required height, and then the stand is placed at the appropriate support points. A jack stand is not a device for lifting the vehicle. Its function is to create stable support for a vehicle raised under appropriate conditions. This is especially important when the work has to be done under the vehicle. Working under a vehicle that rests only on a hydraulic jack is not a safe practice.

Car jack stand

In practice, “car jack stand” and “Jack Stand” are terms denoting the same type of device. Such stands are usually adjustable in height, which allows the user to select a suitable working position. When choosing a jack stand, its maximum load, minimum and maximum height, structural stability and locking system all matter. It is also important to use stands in pairs when the specific work requires it. The 3-ton and 6-ton models available at TechnoKing come as a set with two stands.

3-ton car stand

The 3-ton jack stand is a practical choice for working with various passenger cars, if the load matches the device’s specified capabilities. The adjustable height of the 3-ton car stand available at TechnoKing is approximately in the range of 26 to 43 cm. The model has an additional locking pin and comes as a set with two stands. Such a stand can be used in situations related to tires, the undercarriage, oil changes and other repair work. Before use, it is essential to take into account the instructions of both the vehicle’s and the stand’s manufacturer.

6-ton Jack Stand

When working with a heavier vehicle, a 6-ton car stand rated for a high load may be needed. The 6-ton Jack Stand available at TechnoKing adjusts to a height of approximately 37 to 61 cm. The model has an additional safety locking pin and a strong metal construction. It may be of interest for working with jeeps, SUV type vehicles and commercial transport of a corresponding weight. A higher adjustment range is especially practical in the case of vehicles with high ground clearance.

Jack for a jeep

When working with SUV and jeep type vehicles, there are two main points to consider. The first is the vehicle’s weight. The second is the height of the jacking point. A jack for a jeep should cover both the required load and the appropriate lifting range. The height and load capacity of the jack stand used also matter. If the jack cannot raise the vehicle high enough, placing the appropriate Jack Stand will also become difficult. Therefore, it is best to choose the jack and the stand as parts of a single working system.

Jack for an auto service

At an auto service, a jack may be used daily and with various vehicles. Therefore, when choosing a professional hydraulic jack, not only the tonnage matters but also the working range and the practicality of the construction. At an auto service, one day work may be needed on a low sedan, and then on an SUV type vehicle. Therefore, a universal working range is often an important factor. An appropriate set of stands should also be taken into account. After the vehicle is raised, securing it safely is one of the main stages of the repair work.

Jack for a home garage

A car jack is not needed only by a professional mechanic. If you change your vehicle’s tires yourself, perform oil changes or periodically want to inspect the undercarriage, a hydraulic jack is a practical tool for the home. It is important to choose the device correctly according to your vehicle. Using appropriate jack stands is also recommended. A jack can be used to lift the vehicle, but during lengthy repair work a stable jack stand is an essential additional device.

Jack for changing a tire

Changing a tire is one of the most common uses of a car jack. First of all, the vehicle should stand on a firm and as level as possible surface. Then the jack is placed at the appropriate jacking point specified by the manufacturer. The vehicle is raised to the height needed for removing and mounting the tire. If the work does not require getting under the vehicle, the procedure differs from a full repair job. In any case, you must follow the instructions of the specific vehicle and jack.

Car stand for changing the oil

When changing the oil, some vehicles may need to be raised to a certain height. If the work is done from under the vehicle, you cannot rely on the jack alone. Accordingly selected car jack stands are used so that the raised vehicle is secured in the working position. The stands must be placed at the support points permitted by the vehicle’s manufacturer. Before starting work, it is essential to make sure that the vehicle is in a stable state.

Stand for inspecting the undercarriage

To inspect certain components of the undercarriage, raising the vehicle is often essential. A Jack Stand for inspecting the undercarriage allows the mechanic to secure the vehicle at the appropriate height. This may be needed when inspecting the suspension, the brakes, some fasteners and other parts. For safety, always use a stand with a load capacity and height appropriate for the work.

Why can’t you work with only a jack?

A jack is first of all a lifting device. Its construction is designed for raising the vehicle up. For working under the vehicle, firm support rated for the appropriate load is needed. A malfunction in the hydraulic system, incorrect placement or movement of the vehicle can affect stability. Therefore, before going under the vehicle, the car must be secured with appropriate Jack Stand stands. This is one of the most important safety rules when working with a jack.

How to use a jack safely?

Always use the jack on a firm and level surface. The vehicle should be stopped in the appropriate mode and, if necessary, wheel chocks should be used. Place the jack only at the jacking point specified by the vehicle’s manufacturer. Do not exceed the device’s maximum permissible load. After raising the vehicle, before working under it, use appropriate jack stands. Before starting work, check that the stands are positioned correctly and the vehicle stands stably.

How to choose a jack?

When choosing a jack, first determine the vehicle’s weight. Then verify the jack’s maximum load. The minimum height also matters. For a low vehicle, you need a jack that can be placed freely at the appropriate jacking point. Also check the maximum lifting height. For an SUV and a vehicle with high ground clearance, a higher working range may be needed. If you are buying the device for an auto service, also take into account the need to service various vehicles.

How to choose a car stand?

When choosing a jack stand, load capacity is one of the main parameters. The adjustable height range also matters. The stand’s minimum and maximum height must match the position in which you need to secure the vehicle. Pay attention to the locking system and the stability of the construction. For a tall vehicle, you may need a higher Jack Stand. For a passenger car, a relatively low working range may be more practical.

The jack and the Jack Stand together

In the process of safely lifting a vehicle, the jack and the Jack Stand perform different functions. The jack raises the vehicle. The Jack Stand secures the vehicle. Correctly combining these two devices is especially important during jobs where you have to work under the vehicle. Therefore, for a home garage or a professional service, buying only a good jack is not always enough. Stands of appropriate load capacity are also an essential part of the working equipment.

Car lift and hoist

Georgian users sometimes search for a car jack as a car lift or a hoist. In a broad sense, these terms describe devices for lifting a vehicle. A hydraulic floor jack is a compact lift used mainly to raise one part of the vehicle. It should not be confused with a full-size auto service lift, which raises the vehicle entirely. The search terms differ, but when choosing a specific product you must take into account the device’s actual construction and purpose.

Maintaining a hydraulic jack

A jack’s good working condition requires regular attention. Before use, it is advisable to inspect the device visually. Observe the hydraulic part, the wheels, the handle, the lifting platform and other important elements. If you notice a leak of hydraulic fluid, a damaged part or unstable operation, using the device without an appropriate inspection is not recommended. The jack should also be stored in a dry and appropriate environment.

Maintaining a car stand

A Jack Stand is a relatively simple mechanical construction, but monitoring its condition is still important. Before use, check the support part, the locking pin, the adjustment mechanism and the metal construction. If the device is deformed, damaged or the locking mechanism does not work properly, its use is not recommended. A car stand is a safety device and its technical condition is especially important.

Buying jacks and jack stands at TechnoKing

At TechnoKing you can choose car jacks and jack stands for both personal and professional use. The category features 2.5-ton and 3-ton hydraulic jacks, as well as 3-ton and 6-ton Jack Stand type car stands. If you are looking for a hydraulic jack, a car lift, a car stand, a jack stand or a Jack Stand, before purchasing the product compare the maximum load, the minimum and maximum height and the data appropriate for your vehicle. A correctly chosen jack makes lifting the car easier, while an appropriate jack stand is needed to secure the raised vehicle safely and stably.